19
© Munters Corporation, August 2022
QM1217r0
Installation Instructions
Chapter 2
Step 22
Secure Left Door and Middle Door together with (2) Carriage Bolts [F] and Nuts [E] through (2) holes in Inside
and Outside Door Supports.
See Figure 21.
Apply a bead of caulk to the joint between doors at the hinge
and the top of the doors.
Figure 21
Carriage Bolt [F]
Holes in Bracket
Left CSI24 Door
Middle CSI24 Door
Bead of Caulk
Nut [E]
Step 23
Repeat
Steps 20, 21 and 22
for the remainder of the Middle Doors in the row until you just have the Right
CSI24 Door to install.
Step 24
When the Right CSI24 Door is installed, tight against the last Middle Door, it should overlap the right End
Framing by 2". If needed, the left end of the Right CSI24 Door may be trimmed to allow proper fit and
overlap.
See Figure 22.
Right CSI24 Door
End of Right Door to be Trimmed (if needed)
Figure 22
