© Munters Corporation, August 2022
12
QM1217r0
Installation Instructions
Chapter 2
Step 10
Slide Door Edge Trim [2] onto the bottom edge of the CSI24 Door [1] and secure it with (12) TEK Screws [H]
through the (6) single holes in the middle area of the Door Edge Trim, leave the left most and right most holes
empty.
See Figure 9.
Figure 9
Figure 10
2.5 Middle Door Assembly
TEK Screw [H]
CSI24 Door with Hinge [1]
Door Edge Trim [2]
Do not use
this hole at
this time.
Do not use this hole
at this time.
Step 11
Attach a Rack Mounting Plate [12] on each side of the door to the left pair of holes in the Door Edge Trim
using (2) TEK Screws [H] per Plate.
See Figure 10.
Then attach an Outside Door Support [11] (24") at the
right end of the CSI24 Door, on the room side, so that half of the Support is on the Door and the other half
of the Support hangs off the end.
See Figure 10.
Rack Mounting Plate [12]
Left Pair of Holes
TEK Screw [H]
CSI24 Door with Hinge
Outside Door
Support [11]
TEK Screw [H]
Room Side shown
for clarity
