
MEK-40,65 / MAK-40,65
Issue 08.2008/Rev. 01
Page 3/20
Konformitätserklärung des Herstellers
im Sinne der EG-Maschinenrichtlinie 98/37/EG Anhang II B,
Declaration of Conformity by the Manufacturer
as defined by machinery directive 98/37/EEC, Annex II B
MUNSCH Kunststoff-Schweißtechnik GmbH
Im Staudchen
D-56235 Ransbach-Baumbach
declare on their own behalf and responsibility that the hand extruder
Machine type:
Hand extruder
Type designation:
MEK-40,65
MAK-40,65
to which this declaration refers conforms to the following standards, codes and regulations:
EU Machinery Directive 98/37/EC
EU EMC Directive 89/336/EC
EN 61029-1 (VDE 0740 Part 500)
DIN EN 55014-1
VDE 0701 Part 1
DIN EN 55014-2
VDE 0702 Part 1
DIN EN ISO 12100-1
EU Low-Voltage Directive 73/23/EC
DIN EN ISO 12100-2
EN 60204-1 (VDE 0113 Part 1)
Conformance of this industrial tool with the above codes and standards is subject to the condition that it is used
in accordance with the contractually agreed service conditions, the responsibility for which shall rest with the
user.
Modifications to the machine/unit or the use of the machine/unit for applications other than the intended service
will void this declaration, unless expressly approved in writing by the manufacturer.
Ransbach-Baumbach, August 2008
Dipl.-Ing. Stefan Munsch
Managing Director