mundoclima CL23215 Скачать руководство пользователя страница 5

̚

4.    INSPECTING AND HANDLING THE UNIT

At delivery, the package should be checked and any damage should 
be reported immediately to the carrier claims agent.

When handling the unit, take into account the following:

5.    INDOOR UNIT INSTALLATION

5.1   Installation place

          Fragile, handle the unit with care.

        Keep the unit upright in order to avoid compressor 
damage.

Choose on before hand the path along which the unit is to be 
brought in.

Move this unit as originally package as possible.

When lifting the unit , always use protectors to prevent belt 
damage and pay attention to the position of the unit’s centre 
of gravity.

1

2

3

4

Indoor Unit

A place where is no obstacle near  the inlet and outlet area.

A place which  can bear  the weight  of the indoor unit.

A place which  allows  the  air  filter  to  be removed.

A place where  the  reception range  is not Exposed to direct 
sunlight.

A place  where  the  connective  pipe  and drain hose is easy 
to led out.

A place 1m or more to TV, radio instrument, in the center of 
the room is perfect.

The indoor unit should  be installed 2.5 meters or more above 
the floor.

Installation in  the following places  may cause  trouble.If it  
is  unavoidable,  please consult with the local dealer.

A place full of machine oil.

A saline place such as coast.

A place full of sulfide gas such as hot-spring resort.

Places where there  are high  frequency machines such 
as  wireless equipment, welding

Machine, and medical facility.

A place there is no combustive gases and volatile matter. 

A place of special environmental conditions.

Installation Board and Its Direction (unit: mm)

1      Fix the installation board.

Install the installation board horizontally on structural parts in 
the wall with the spaces provided around the plate.

In case of brick, concrete or similar type walls,make 5mmdia, 
holes in the wall. Insert clip anchors for appropriate mounting 
screws.

Fix the installation board on the wall.

5.2   Drilling A Hole and Mounting Installation 
        Board

71\80\90 type

Fig.5-1

Right installation

Fig.5-3

horizontal line

mounting board 
of indoor unit

1  2  0  or more

  f     r    o     m   t   h   e  wall

120 or more  
from the wall

150 or more
from the ceiling 

325

1250

Hook Part

Installation manual

Wall mounted split D4+

4

Содержание CL23215













Отзывы: