Multitech RouteFinder RF825-C-Nx Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 106

background image

Chapter 5 – Using the RouteFinder's Web Management Software

Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B)

69

VPN > IPSec > Add IKE Connection

Key Life

The duration for which the IPSec SA should last is from successful negotiation to expiration. The
default value is 28800 seconds and the maximum is 86400 seconds.

Number of Retries

Specify the number of retries for the IPSec tunnel. Enter zero for unlimited retries.

Left Next Hop

Next Hop

is the address of the next device in a routing table’s path that moves a packet to it’s

destination. This setting can be configured or left as a static value: 0.0.0.0. When not configured, the
value is set to the Gateway of the Box/Gateway configured on the Interface/Right IP. The selection is
based on the Left and Right IP.

Local WAN IP

This is the interface initiating the IPSec tunnel.

Local LAN

Internal subnet of the local security gateway for which the security services should be provided. If the
RouteFinder acts as a host, this should be configured as None.

Remote Gateway IP

Interface where the IPSec tunnel ends. In the case of a Road Warrior with a Dynamic IP address, this
should be configured to

ANY

.

FQDN

FQDN is a DNS resolvable fully qualified domain name with which identity the right peer can be
identified. When FQDN is selected, the Remote Gateway IP should be blank.

Remote LAN

Internal subnet of the remote security gateway for which the security services should be provided. If
the remote end is the host, this should be configured as None.

UID (Unique Identifier String)

Check the UID box to enable the Local ID and Remote ID. Local ID and Remote ID are active only
when UID is enabled.

Local ID

Enter a string identifier for the local security gateway.

Remote ID

Enter a string identifier for the remote security gateway.

NetBIOS Broadcast

Check this option to enable broadcasts over the connection. It will allow computers on the network to
share Microsoft file and printer sharing information.

«
...
67
68
69
70
71
...
»

Содержание RouteFinder RF825-C-Nx











































































































Отзывы:

Нет отзывов

Похожие инструкции для RouteFinder RF825-C-Nx

EdgeLens INT10G8LR56

Бренд: Garland Страницы: 30

Бренд: ZyXEL Communications Страницы: 244

Бренд: EVOC Страницы: 57

Бренд: Buffalo Страницы: 2

Fast EtherLink XL PCI 10/100BASE-TXNetwork Interface...

Бренд: 3Com Страницы: 12

WebShare 141 WN

Бренд: Atlantis Страницы: 78

Bolide BN-NVR/NX

Бренд: GSA Страницы: 101

Бренд: Manson Engineering Industrial Страницы: 10

Бренд: EMC Страницы: 88

Бренд: ZyXEL Communications Страницы: 191

Бренд: Datalogic Страницы: 2

Бренд: Acard Страницы: 43

Бренд: Ubiquiti Страницы: 2

Бренд: QNAP Страницы: 68

ibaBM-FOX-i-3o-D

Бренд: IBA Страницы: 13

TS-U100 - NAS Server - USB

Бренд: TRENDnet Страницы: 47

AirLancer MC-54

Бренд: Lancom Страницы: 47

Бренд: MikroTik Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды