Multitech MultiVOIP MVP100GK Gatekeeper Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 91

background image

Chapter 2 – Installation

Multi-Tech Systems, Inc. MultiVOIP Gatekeeper User Guide

9

Chapter 2 - Installation

This chapter explains how to set up and connect cables for the Gatekeeper. This product includes the Windows
operating system and Gatekeeper software, and is ready to be connected to an Ethernet concentrator.

Safety Warnings

1.

Use this product only with UL- and CUL-listed computers.

2.

To reduce the risk of fire, use only 26 AWG or larger telephone wiring.

3.

Never install telephone wiring during a lightning storm.

4.

Never install a telephone jack in a wet location unless the jack is specifically designed for wet locations.

5.

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected
at the network interface.

6.

Use caution when installing or modifying telephone lines.

7.

Avoid using a telephone during an electrical storm; there is a risk of electrical shock from lightning.

8.

Do not use a telephone in the vicinity of a gas leak.

Caution:

Danger of explosion if battery is incorrectly replaced. A lithium battery on the Gatekeeper board

provides backup power for the time-keeping capability. The battery has an estimated life expectancy of ten years.
Contact Multi-Tech if you suspect a failed battery. If date and time is incorrect after having the unit powered off, it
may be due to a weak battery or incorrect setup.

Caution:

The Ethernet ports are not designed to be connected to a Public Telecommunication Network.

Safety Recommendations for Rack
Installations

•

Ensure proper installation of the Gatekeeper in a closed or multi-unit enclosure by following the
recommended installation as defined by the enclosure manufacturer. Do not place the Gatekeeper directly
on top of other equipment or place other equipment directly on top of the Gatekeeper.

•

If installing the Gatekeeper in a closed or multi-unit enclosure, ensure adequate airflow within the rack so
that the maximum recommended ambient temperature is not exceeded.

•

Ensure that the Gatekeeper is properly connected to earth ground via a grounded power cord. If a power
strip is used, ensure that the power strip provides adequate grounding of the attached apparatus.

•

Ensure that the main supply circuit is capable of handling the load of the Gatekeeper. Refer to the power
label on the equipment for load requirements.

•

Maximum ambient temperature for the Gatekeeper is 40 degrees Celsius (104

°

F).

This equipment should only be installed by properly qualified service personnel.

•

Connect like circuits. In other words, connect SELV (Secondary Extra Low Voltage) circuits to SELV circuits
and TN (Telecommunications Network) circuits to TN circuits.

«
...
7
8
9
10
11
...
»

Содержание MultiVOIP MVP100GK Gatekeeper




























































































Отзывы:

Нет отзывов

Похожие инструкции для MultiVOIP MVP100GK Gatekeeper

Бренд: ABB Страницы: 20

Бренд: ABB Страницы: 66

Бренд: 3Com Страницы: 496

OfficeConnect 3CR100A97

Бренд: 3Com Страницы: 177

Бренд: ICC Страницы: 281

Бренд: Moxa Technologies Страницы: 6

Бренд: System Sensor Страницы: 10

Бренд: Kuhnt Страницы: 173

Бренд: Quadro Страницы: 54

OFFICE CONNECT CABLE/DSL SECURE GATEWAY...

Бренд: 3Com Страницы: 102

WELLGATE 26 Series

Бренд: WELLTECH Страницы: 94

M2M CONTROL C660

Бренд: Infranet Technologies Страницы: 36

Бренд: ABB Страницы: 111

Бренд: ABB Страницы: 72

MicroSCADA Pro SYS 600C

Бренд: ABB Страницы: 42

Ability ATT-VZN SIM card ready gateway

Бренд: ABB Страницы: 16

Бренд: ABB Страницы: 41

Бренд: ABB Страницы: 280

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды