Multitech MultiVOIP MVP100GK Gatekeeper Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 91

background image

Chapter 5 – Gatekeeper Software

Multi-Tech Systems, Inc. MultiVOIP Gatekeeper User Guide

77

Network Parameter Definitions

(cont’d)

Field Name

Values

Description

Configuration Parameters

IRQ Interval (sec)

The interval, in seconds, between IRQ messages sent
by the Gatekeeper. IRQ messages are sent to all
online endpoints registered as dynamic in order to
verify that the endpoints are online. The number you
set determines the delay between two IRQ messages
to the same endpoint. Choosing the desired delay
should take into account the following factors:
• IRQ messages add to the traffic already present over

the network, and the shorter the delay, the more IRQ
messages are sent. However, the longer the delay,
the longer it takes for the Gatekeeper to detect
dynamic registrations that have ceased to be online.

• The delay parameter relates to the interval between

two IRQ messages per one endpoint, so the actual
number of the IRQ messages the Gatekeeper
creates during this interval should be multiplied by
the number of endpoints registered dynamically.

• To disable the IRQ polling, set this value to zero.
• The effective IRQ interval cannot fall below three

times the RAS timeout.

• IRQ messages will not be sent at a rate exceeding 20

per second.

Call IRQ Interval

The interval, in seconds, between IRQ messages sent
by the Gatekeeper to query the status of calls. IRQ
messages are sent to all online endpoints registered as
dynamic and having ongoing calls in order to verify that
the calls are still ongoing. The number you set
determines the delay between two IRQ messages to
the same endpoint regarding the same call. Choosing
the desired delay should take into account the following
factors:
• IRQ messages add to the traffic already present over

the network, and the shorter the delay, the more IRQ
messages are sent. However, the longer the delay,
the longer it takes for the Gatekeeper to detect calls
that are stale.

• The delay parameter relates to the interval between

two IRQ messages per one call, so the actual
number of the IRQ messages the Gatekeeper
creates during this interval should be multiplied by
the number of ongoing calls registered dynamically.

• To disable the IRQ polling, set this value to zero.

The effective IRQ interval cannot fall below three
times the RAS timeout.

IRQ messages will not be sent at a rate exceeding 20

per second.

«
...
75
76
77
78
79
...
»

Содержание MultiVOIP MVP100GK Gatekeeper




























































































Отзывы:

Нет отзывов

Похожие инструкции для MultiVOIP MVP100GK Gatekeeper

Бренд: CloudGate Страницы: 25

Бренд: Spectrum Brands Страницы: 2

Бренд: Exsys Страницы: 27

Flamco Flamconnect GW-10

Бренд: Aalberts Страницы: 2

SpeedStream 5450

Бренд: Siemens Страницы: 83

SpeedStream 6500 Series

Бренд: Siemens Страницы: 98

Бренд: 2Wire Страницы: 138

Бренд: VOGO Страницы: 24

Wireless Media Gateway WMG120

Бренд: ViewSonic Страницы: 105

Бренд: Wildix Страницы: 5

Бренд: Wildix Страницы: 15

Бренд: 2Wire Страницы: 131

Бренд: 2Wire Страницы: 132

Бренд: ELKOR Страницы: 2

Бренд: Deep Sea Electronics Plc Страницы: 50

Бренд: ENDIAN Страницы: 2

Бренд: Zte Страницы: 81

CC-Link RCM-GW-CC

Бренд: IAI Страницы: 126

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды