Multitech MultiVOIP MVP100GK Gatekeeper Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 91

background image

Chapter 2 - Gatekeeper Configuratrion

Multi-Tech Systems, Inc. MultiVOIP Gatekeeper User Guide

17

Regional Parameters

If you are going to continue with the local configuration of the Gatekeeper and don’t plan to remotely access the
Gatekeeper through the command modem, you do not have to consider the Regional Parameters. Skip the
Regional Parameters and continue on with the setting of the Gatekeeper’s IP Address in the next section.

If you would like to configure the Gatekeeper once it is connected into the network that it is going to be used in,
you need to consider the Regional Parameters. If the Gatekeeper is being used in the United States, the default
parameter setting, the Regional Parameter does not have to be changed.

If the Gatekeeper is being used in any other country/region, the Regional Parameters have to be changed to that
country/region’s requirements.

Modem Configuration

Before you can remotely configure the Gatekeeper, the Command Modem on the Gatekeeper has to be
connected to a dial up line, the phone number of that dial up line has to be known by the person configuring the
Gatekeeper remotely. The following modem configuration procedure provides you with the steps necessary to
connect the command modem to a dial up line once the Gatekeeper is connected to its network, the Gatekeeper
software loaded on the PC, and the dial up connection is established.

1.

Once the Gatekeeper is connected to its network, connect an RJ-11 phone cable between the Command
Modem connector on the back panel of the Gatekeeper and a telephone jack that is connected telephone
line.

2.

Find out the telephone number of this connection so that the person configuring the remote PC can enter
this phone number into the Dial String on the Com Port Setup screen.

3.

Now, all activity is from the remote PC. Connect the remote PC to a dial up line.

4.

Load the Gatekeeper software on the remote PC.

5.

From your desktop, click on Start



Programs



MultiVOIP Gatekeeper x.xx (x.xx is version number)



Configuration Port Setup and the COM Port Setup screen is displayed.

«
...
15
16
17
18
19
...
»

Содержание MultiVOIP MVP100GK Gatekeeper




























































































Отзывы:

Нет отзывов

Похожие инструкции для MultiVOIP MVP100GK Gatekeeper

Бренд: Xylem Страницы: 24

Pathport OCTO 64 Series

Бренд: Pathway connectivity solutions Страницы: 70

Бренд: Dragino Страницы: 61

Бренд: Pioneer Страницы: 76

Бренд: Tadiran Telecom Страницы: 89

Бренд: t.a.c. Страницы: 4

Бренд: Alcatel-Lucent Страницы: 2

Бренд: ioLIVING Страницы: 13

Бренд: ZyXEL Communications Страницы: 35

Wireless DSL Gateway GT704WG-QW04

Бренд: ActionTec Страницы: 97

PathBuilder S200 Series

Бренд: 3Com Страницы: 162

Бренд: D-Link Страницы: 79

Бренд: 2Wire Страницы: 82

Бренд: Zennio Страницы: 20

Бренд: Salto Страницы: 3

DeviceLinx XPort Direct

Бренд: Lantronix Страницы: 62

Бренд: Honeywell Страницы: 6

ADPRO iFT Series

Бренд: Honeywell Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды