Chapter 5 – Gatekeeper Software
Multi-Tech Systems, Inc. MultiVOIP Gatekeeper User Guide
63
Connection
The Connection group allows you to connect, disconnect, and set up the command port parameters. The
connection group can also be used to remotely reconfigure the Gatekeeper using the command modem port on
the back of the unit.
Modem Configuration
Modem configuration allows you to view and change the configuration of a remote Gatekeeper. Before modem
configuration can be initiated, the remote Gatekeeper has to be configured for the country/region that the
Gatekeeper is operating in. The country/region has to be set in the Gatekeeper locally. The command modem in
the Gatekeeper has to be connected to a PSTN line and the telephone number of that connection has to be
known by the person configuring the PC.
The local PC needs to be connected to a dial-up line and the Gatekeeper software be loaded on the local PC.
From your desktop, click Start
Programs
MultiVOIP Gatekeeper x.xx (x.xx is the version number)
Configuration
Port Setup and the COM Port Setup screen is displayed.
The Select Port and Baud Rate settings have to match the communications port requirements on your local PC.
The only change in the Modem Setup group should be the Dial String has to be given an AT command for dialing
(atdt) plus the phone number of the remote Gatekeeper. When you click on the OK button, the dialing sequence
begins. The Reading Setup dialog box is displayed and then the main Gatekeeper screen is displayed. This is the
main screen of the remote Gatekeeper. Now, you can change any of the configuration parameters of the remote
Gatekeeper. When you are finished, click Save and Reboot to update the configuration of the remote Gatekeeper.
Содержание MultiVOIP MVP100GK Gatekeeper
Страница 1: ...MVP100GK User Guide...