manualshive.com logo in svg

Multitech MultiModem MT2834ZPW, Руководство пользователя

Поделиться
Скачать
Multitech MultiModem MT2834ZPW Скачать руководство пользователя страница 63

Chapter 7 - Warranty, Service and Tech Support

63

The Multi-Tech BBS

Multi-Tech maintains a bulletin board system (BBS) for its customers.
Information available from the BBS includes new product information,
product upgrade data, and problem-solving tips. There is also a
message service that lets you request additional information. The
phone number for the Multi-Tech BBS is (800) 392-2432 (USA and
Canada) or (612) 785-3702 (local and international).

The BBS can be accessed by any asynchronous modem operating at
1200 bps to 33,600 bps at a setting of 8 bits, no parity, and 1 stop bit
(8-N-1).

Logging on to the Multi-Tech BBS

To log on to the Multi-Tech BBS, perform the following steps:

1.

Set your communications program to 8-N-1.

2.

Dial our BBS at (800) 392-2432 (USA and Canada) or (612) 785-
3702 (international and local).

3.

At the prompts, type your first name, last name, and password;
then press ENTER. If you are a first time caller, the BBS will ask if
your name is spelled correctly. If you answer yes, a questionnaire
will appear. You must complete the questionnaire to use the BBS
on your first call.

4.

Press ENTER until the Main Menu appears. From the Main Menu
you have access to three main areas: the Files Menu, the Message
Menu, and Bulletins. For help on menu commands, type ?.

Downloading a File

If you know the file name

1.

From the Main Menu, type F to access the Files Menu, then type D.

2.

Enter the name of the file you wish to download from the BBS.

3.

If a password is required, enter the password.

4.

Answer Y or N to the automatic logoff question.

Содержание MultiModem MT2834ZPW































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды