manualshive.com logo in svg

Multitech MultiModem MT2834ZPW, Руководство пользователя

Поделиться
Скачать
Multitech MultiModem MT2834ZPW Скачать руководство пользователя страница 27

Chapter 3 - Testing Your Installation

27

Step 4: Test the Voice Function

There are several tests you can perform to verify the MT2834ZPW’s
voice circuits. Try the answering machine test first; if that doesn’t work,
and you have a microphone and speaker connected to the
MT2834ZPW, try the loopback and speakerphone tests, which can test
the modem’s voice circuits without special software.

Answering Machine Test

Test the MT2834ZPW’s voice function by using the included software to
set up the MT2834ZPW as a telephone answering machine. Have a
friend call and leave a message, then play it back.

If your modem will not play sound files in voice mode, go to the
Windows Control Panel and double-click on the Multimedia icon. Under
the Audio tab, select “Modem Wave Driver” as your preferred device for
both playback and record settings, then try again.

Loopback Test

1.

Connect a microphone and speaker to the MT2834ZPW. To avoid
feedback, make sure the microphone and speaker are well
separated; better yet, use a headphone instead of a speaker.

2.

Select Start, Programs, Accessories, HyperTerminal.

3.

Double-click on the Multi-Tech BBS icon you created in “Step 2:
Call the Multi-Tech BBS.” HyperTerminal starts with the Connect
dialog box open.

4.

Click Cancel in the Connect dialog box.

5.

In the HyperTerminal terminal window, type AT&&S and press
ENTER. This command causes input from the microphone to be
looped back to the speaker.

6.

Speak into the microphone; you should hear your voice on the
speaker or headphone.

7.

Type ATZ and press ENTER to reset the modem.

Содержание MultiModem MT2834ZPW































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды