manualshive.com logo in svg

Multitech MultiModem MT2834ZPW, Руководство пользователя

Поделиться
Скачать
Multitech MultiModem MT2834ZPW Скачать руководство пользователя страница 6

MT2834ZPW Owner’s Manual

6

Congratulations

Congratulations on your purchase of one of the finest internal data/fax/
voice modems available today: the MultiModemZPW

™

 from Multi-Tech

Systems.

The MultiModemZPW is an internal, half-length, fax modem card that
can be plugged into any 16-bit ISA expansion slot. Its unique
controllerless design uses your personal computer’s processing power
to handle many communication functions normally done by the modem,
a feature that gives the MultiModemZPW significant flexibility and
upgrade potential as faster microprocessors become available.

This owner’s manual will help you to install, configure, use, and
troubleshoot your modem.

Features

The MultiModemZPW is a full-featured internal data/fax/voice modem
designed for Pentium computers running the Windows® 95 operating
system. General features include:

• Easy Windows 95 Plug-and-Play (PnP) installation.

• Compliance with major ITU-T, TIA, and EIA international standards

to ensure compatibility with other modems.

• Discrimination between data, fax, and voice calls.

• Caller ID to identify your caller’s phone number.

• Compliance with the V.80 standard, allowing video conferencing

over analog telephone lines with any H.324 video phone system.

Data

• Supports the enhanced ITU-T V.34 standard, with data

transmission speeds to 33.6K bps, while also maintaining
compatibility with lower-speed modems, including the AT&T

®

V.32terbo open standard.

• Supports asynchronous data rates at 33.6K, 31.2K, 28.8K, 26.4K,

24K, 21.6K, 19.2K, 16.8K, 14.4K, 12K, 9600, 4800, 2400, 1200,
and 0–300 bps.

• Automatic fallback to slower speeds in noisy line conditions, and

fall-forward to faster speeds as conditions improve.

Содержание MultiModem MT2834ZPW































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды