Multitech CommPlete MT5634HD8, Руководство пользователя, Страница: 23 / 99

3 AT Commands
CommPlete Communications Server 17
Topic Command Description Page
Immediate Action A / Repeat last command 26
I Information request
&B V.32 auto retrain
& V View current configuration
Flow Control & M 0 Asynchronous mode 27
&K0 or \Q0 Flow control disabled
&K3 or \Q3 Hardware flow control
&K4 or \Q1 XON/XOFF flow control
\ X 0 XON/XOFF no pass-through
&J Auxiliary relay control
\J Enable data buffer control
\G Modem port flow control
\K Set break control
+ES=6 Enable synchronous buffered mode
Escape +++AT<CR> Default in-band escape sequence 30
Sequences A Force answer mode
O Go back online
Diagnostics & T Self-test commands 30
Speaker Settings L Monitor speaker volume 31
M Monitor speaker mode
Dialing Commands
Dialing commands are used to dial and hang up.
D
s
Dial{xe "dialing:a phone number"}{xe "AT commands:D"}{xe "Dial
command"}
s = phone number
Default: none
The letter D in a command causes the modem to dial the telephone number immedi-
ately following it. For example, if you type
ATD5551212<CR>
, the modem dials
the number 555-1212.
The MT5634HD8 supports several dialing methods. With the D command, you can
specify either pulse (ATDP) or tone (ATDT) dialing. You can also modify the
dialing command with several other characters that are explained in the section
“Dial Modifier Commands”, later in this chapter.
The modem also lets you select either smart (wait-for-dial-tone) dialing or blind
d i a l{xe "dialing:blind dialing"}{xe "blind dialing"}ing. With smart dialing{xe
"dialing:smart dialing"}{xe "smart dialing"}, the modem waits for and detects dial
tone{xe "dial tone"}s and busy signal{xe "busy signal"}s. With blind dialing, the
modem works with timed pauses (determined by the value of register {xe "S-
registers:S6"}S6), not dial tone and busy signal detection. See the X command for
more information on blind and smart dialing.