TB12SE/TB12PE TUFFTRUK POWER BUGGY• OPERATION MANUAL — REV. #0 (04/01/22) — PAGE 15
INSPECTION
TIRE CHECK
Check for
worn
or
defective
tires (Figure 4). Replace any
defective or worn tires immediately.
Figure 4. Tire Wear
The wheels and tires of the power buggy are very important
in its effective operation.
1. Check the tires regularly to make certain the lug nuts
are tight.
2. Make sure tires are inflated to manufacturer's
suggested tire pressure.
DO NOT
operate the buggy
with bad or worn tires.
LINKAGE CHECK
Check and make sure that
all
linkages within the TuffTruk
buggy are functioning correctly.
STEERING CHECK
1. Check and make sure that the power buggy's steering
turns freely and that there is no binding.
This section is intended to assist the operator with the initial
start-up of the unit. It is extremely important that
this section be read carefully before attempting
to use the TuffTruk walk-behind power buggy in
the field.
DO NOT
use your buggy until the
General Information, and Inspection sections
of this manual have been
read and thoroughly understood
.
WARNING
Failure to understand the operation of the buggy could
result in severe damage to the buggy or personal injury.
Reference Figure 2 for the location of any components
referenced in this manual.
CAUTION
NEVER
operate the TuffTruk walk-behind
power buggy in a confined area or
enclosed area structure that does not
provide ample free flow of air. Gasoline
models only.
