MULTIQUIP MC12PH Скачать руководство пользователя

Страница: 35 / 79

PAGE 34 — MC12PH CONCRETE MIXER • OPERATION AND PARTS MANUAL — REV. #1 (09/02/15)

NAMEPLATE AND DECALS ASSY.

REAR VIEW

ENGINE COVER

SAFETY

INSTRUCTIONS

1. Read owner’s manual

before operating.

2. Keep unauthorized and untrained

people away from machine during

operation.

3. Make sure all safety devices are in

place before this machine is started.

4. Make sure engine is turned off and

spark plug wire is disconnected before

cleaning the machine.

5. Keep hands and fingers away from

moving objects.

6. Do not operate machine in an enclosed

area, proper ventilation is required.

7. Never leave machine unattended when

operating.

8. Always stop engine and allow engine

to cool before adding fuel or oil.

520935

Keep safety grate, guards and doors

in place. Shut off engine or electric

motor before inspection or maintenance.

Moving parts can cut and crush.

engine or electric motor

before placing hands in mixing drum.

SHUT OFF

This machine to be operated by qualified

personnel only. Ask for training as needed.

P/N 521229

WARNING

To avoid injury, you

read and

understand operator’s manual before

using this machine.

MUST

P/N 521232

CAUTION

1. Use manufacturer’s recommended torque values

when tightening wheel lug nuts.
2. Use manufacturer’s recommended tire pressure

values when inflating tires.

DO NOT

exceed

recommended tire pressure.

INSPECT BEFORE TOWING

TIGHTNESS OF WHEEL NUTS
TIRE PRESSURE

P/N 521231

CAUTION

LEGEND

REPRESENTS LOCK PIN
REPRESENTS DRUM STOP BLOCK

MIX

TOW

DRUM LOCK POSITIONING

SEE OPERATION MANUAL FOR PROPER

DRUM LOCK POSITIONING

P/N 521232

CAUTION

1. Use manufacturer’s recommended torque values

when tightening wheel lug nuts.
2. Use manufacturer’s recommended tire pressure

values when inflating tires.

DO NOT

exceed

recommended tire pressure.

INSPECT BEFORE TOWING

TIGHTNESS OF WHEEL NUTS
TIRE PRESSURE

NOTE:

SAME POSITION ON OPPOSITE SIDE

OF CABINET.

QUALITY

MANAGEMENT SYSTEM

CERTIFIED ON

ISO 9001:2008

518524

Discount-Equipment.com

Содержание MC12PH
















































































Результаты поиска

Содержание MC12PH

Отзывы:

Похожие инструкции для MC12PH

Бренды по названию

Популярные бренды

MULTIQUIP MC12PH, Руководство по эксплуатации и запасным частям

Результаты поиска

Содержание MC12PH

Отзывы:

Похожие инструкции для MC12PH

Бренды по названию

Популярные бренды