manualshive.com logo in svg

MULTIQUIP JH55C, Руководство по эксплуатации и запасным частям

Поделиться
Скачать
MULTIQUIP JH55C Скачать руководство пользователя страница 25

JH55C WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #2 (9/4/15) — PAGE 25

Operation

This section is intended to assist the operator with the initial 

start-up of the walk-behind trowel.  It is extremely important 

that this section be read carefully before attempting to use 

the trowel in the field. 

DO NOT

 use your trowel until this 

section is thoroughly understood.

Lifting the Trowel Onto a Slab

Extra care should be taken when lifting the trowel off the 

ground. Serious damage to the machine or personal injury 

could be caused by dropping a trowel.

  WARNING

NEVER

 attempt to lift this machine alone. 

NEVER

 lift 

the trowel by the guard ring as it may rotate and cause 

injury. 

ALWAYS

 make certain the handle is secure and use 

only the manufacturer's approved lifting point. The 

trowel may be lifted at the center lifting bale by crane 

or other lifting device of adequate capacity.

 NOTICE

DO NOT

 attempt to operate the trowel until the Safety, 

General Information and Inspection sections of this 

manual have been read and thoroughly understood.

 NOTICE

The trowel is heavy and awkward to move around. Use 

proper heavy lifting procedures and 

DO NOT

 lift the 

trowel by the guard rings.

OPERATION

Lifting Bale

The lift bale provides an optimal lift point for lifting the trowel. 

When lifting the trowel onto a concrete slab, attach a chain 

or rope to the lifting bale. Make sure the lifting device has 

adequate lifting capacity to lift the trowel.
Using a crane or forklift (Figure 25) to lift the trowel is highly 

recommended, and is perfectly safe for the trowel. 

ALWAYS

 

use extra care when lifting the trowel off the ground.
 

Figure 25. Lifting the Trowel

NEVER

 lift the trowel to unnecessary heights. 

DO NOT

 

stand underneath the trowel while it is being lifted. Serious 

damage to the machine or personal injury could be caused 

by dropping a trowel. 

LIFT

Содержание JH55C









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды