MULTIQUIP JH55C, Руководство по эксплуатации и запасным частям

Страница: 17 / 104

JH55C WALK-BEHIND TROWEL • OPERATION AND PARTS MANUAL — REV. #2 (9/4/15) — PAGE 17
QUICK PITCH ™
HANDLE
(OPTION)
16
11.
Blades
— This trowel is equipped with combination
blades. These blades are versatile and should take
care of most troweling needs. In addition float discs
can be attached to the trowel arms that will allow the
trowel to float on "wet" concrete.
12.
V-Belt Cover
— Remove this cover to gain access to
the V-belt.
NEVER
operate the trowel with this cover
removed.
13. Guard Ring — NEVER put hands or feet inside guard
ring while the machine is running.
14.
Gearbox
— Helical worm gear drive gearbox. Provides
rotation of blades via engine interface.
ALWAYS
check
gearbox oil level (sight glass) prior to each use. Fill with
recommended type gearbox oil.
15. Trowel Arm — NEVER operate the trowel with a bent,
broken or out of adjustment trowel arm. If the blades
show uneven wear patterns or some blades wear out
faster than others, the trowel arm may need to be
adjusted. Use the trowel arm adjustment tool P/N 1817
to adjust the trowel arms.
16.
Quick Pitch™ Control Handle
— Contact MQ unit
sales for this option.
17.
Right Clutch Lever
— Pull up to engage the clutch.
4-blade rotation will start. This is the secondary control
lever.
17
11
12
14
13
15
Figure 3. Trowel Control and Components (Cont.)
TROWEL COMPONENTS