MULTIQUIP GAW180 Series, Руководство по эксплуатации и запасным частям

Страница: 11 / 98

GAW180HE/HEA WELDER-GENSET • OPERATION AND PARTS MANUAL — REV. #1 (10/01/19) — PAGE 11
SAFETY INFORMATION
„
NEVER
use fuel as a cleaning agent.
„
DO NOT
smoke around or near the
equipment. Fire or explosion could result
from fuel vapors or if fuel is spilled on a
hot engine
ELECTRICAL SAFETY
DANGER
„ Turn welder-generator and all circuit breakers
OFF
before performing maintenance on the generator or
making contact with output receptacles.
„
NEVER insert any objects into the
output receptacles during operation.
This is extremely dangerous. The
possibility exists of
electrical shock,
electrocution or death.
„
Backfeed to a utility system can cause
electrocution
and/or property damage.
NEVER
connect the welder-generator
to a building’s electrical system without
a transfer switch or other approved
device. All installations should be
performed by a
licensed electrician
in accordance with
all applicable laws and electrical codes. Failure to do so
could result in electrical shock or burn, causing serious
injury or even death.
Power Cord/Cable Safety
DANGER
„
NEVER
let power cords or cables
lay in water.
„
NEVER stand in water
while AC or DC power from the
generator is being transferred to a load.
„
NEVER use damaged or worn cables or cords when
connecting equipment to generator. Inspect for cuts in
the insulation.
„
NEVER
grab or touch a live power
cord or cable with wet hands. The
possibility exists of electrical shock,
electrocution or death.
„ Make sure power cables are securely connected to the
generator’s output receptacles. Incorrect connections
may cause electrical shock and damage to the generator.
NOTICE
„
ALWAYS
make certain that proper power or extension
cord has been selected for the job. See Cable Selection
Chart in this manual.
Grounding Safety
DANGER
„
These welder-generators are equipped with a grounding
terminal at the base of the pipe frame. Electrical
grounding requirements can differ by State, Province,
District, Municipality, and unique application settings.
„
For portable and vehicle-mounted welder-generators,
Multiquip recognizes the guidance provided in NEC
Handbook Article 250.34 Parts A and B, and 29 CFR
1926.404 (f) (3) (i). If a more defi nitive earth-to-ground
safeguard is required, please consult a qualified
electrician and reference appropriate National Electrical
Code (NEC) guidelines in establishing an exterior
grounding point
„
NEVER
use gas piping as an electrical ground.
BATTERY SAFETY
DANGER
„
DO NOT drop the battery. There is a possibility that the
battery will explode.
„
DO NOT expose the battery to open fl ames,
sparks, cigarettes, etc. The battery contains
combustible gases and liquids. If these
gases and liquids come into contact with a
fl ame or spark, an explosion could occur.
„
DO NOT charge battery if frozen. Battery can explode.
When frozen, warm the battery to at least 61°F (16°C)
WARNING
„
ALWAYS
wear safety glasses when
handling the battery to avoid eye irritation.
The battery contains acids that can cause
injury to the eyes and skin.
„
Use well-insulated gloves when picking up the battery.
„
ALWAYS keep the battery charged. If the battery is not
charged, combustible gas will build up.