9
too much force.
14. Purge the gas supply pipe work to remove air and debris BEFORE connection of the fire.
The 8mm pipe should be used to connect valve to an isolating tap, which must be
adjacent to the appliance (so that when tap is closed appliance is totally isolated).
NOTE
Soft soldered joints should not be used beneath the burner tray.
WARNING
: Flexible pipe must not be used
.
15. Turn on gas supply and check for gas soundness. (Tests should be carried out in
accordance with current Gas Safety Regulations).
16. Place refractories on burner as shown
PEBBLE AND DRIFTWOOD LAYOUT
TOTAL = 16 PEBBLES, 1 LARGE, 1 MED LARGE, 8 MED OF DRIFTWOOD
UNDER NO CIRCUMSTANCES MUST YOU CHANGE THE
THE LAYOUT OR QUANTITY OF REFRACTORIES
LAYER 1
LAYER 2
1 X LARGE PIECE OF DRIFTWOOD
1 X MED/LARGE PIECE OF
3 X ROW OF 6 PEBBLES
DRIFTWOOD
LAYER 3
LAYER 4
4 X MED PIECES OF DRIFTWOOD
4 X MED PIECES OF DRIFTWOOD
1 X SMALL PIECE OF DRIFTWOOD
