7
However should you decide not to follow the
recommendation and do not fit a hearth or
barrier or decide to remove one or both.
Then consideration as to the safety of the
occupants of the room should be given.
CONTENTS CHECKLIST
1. Box
2. Four Part Frame (attached to box)
3. Fixing Screws
4. Burner Shelf
5. Burner
6. Refractories
7. 1 x Receiver pack (Inc batteries)
8. 1x Burner Control Unit
9. 1x Nut and Olive for 8mm Inlet Pipe
1x 1½ meter 8mm Copper Pipe
Preparing the Fireplace Opening
1. Create an opening for the box using
the dimensions shown.
2. Shown are the actual box dimensions when creating
the hole for the box allow 2-5mm extra for a good fit.
600mm
330mm
3. The base of the opening must be flat and level.
4. Route the gas supply feed inside the fireplace
opening and provision made for it to enter the
box through one of the four slots either at the
back of the box or at either side.
5.Remove the four pieces of frame by unscrewing
the screws, see next page.
400m
m
