3
PLEASE READ THESE INSTRUCTIONS FULLY
BEFORE COMMISSIONING OR USE
CONFORMITY & GENERAL NOTES
SECTION 1
Because Multiglow Fires believe in the use of modern technology and materials, they reserve the
rights to modify or change the layout and controls of their burner trays, at any time, whilst still
complying with current specifications.
Therefore these ‘Instructions’ are a general guide only and not specifically in compliance with the
shape or size of your appliance. These units must be installed in line with the current
‘GAS
SAFETY (INSTALLATION AND USE) REGULATION’
applicable to the country of use.
NOTE:
For the safe and efficient operation of this appliance, it must be installed inline with
the current British Standard (BS 5871:PART 3) or the equivalent standard for the country of use
and take into account the
Local and national building regulations or bylaws where necessary.
NOTE:
This appliance has been designed for use on NATURAL GAS only. Prior to
installation, ensure that the distribution conditions (identification of the type of gas and pressure)
and the adjustment of the appliance are compatible.
NOTE:
THE WHITE FIBRE BLANKET SHOULD NOT BE REMOVED FROM THE BURNER
TRAY.
NOTE:
Multiglow Fires will
not
accept any liability or responsibility for a appliance that has
been installed outside of the technical data specified in this manual and is not in agreement with
the above statements.
The MUTIGLOW CLASSIC
II
is a Decorative Fuel Effect (D.F.E.) primary aerated gas fire
designed to comply with BS EN 509:2000 and is intended for decorative use only. It has been
designed to operate on Natural Gas (N.G.) only and must be fitted on a non-combustible hearth in
a standard builders opening, with a class 1 chimney in compliance and satisfying the
requirements of BS 5871- PART 3. The appliance has been tested and approved with a flue of 7”
(178mm) diameter and having a minimum effective height of 10ft. (3mtrs.)
The MULTIGLOW CLASSIC
II
conforms to the relevant Safety Standards but during use there
are naked flames and parts of the casing become hot. A suitable guard to (BS.6539 fireguards for
