Multi-Tech MultiFRAD FR2201, Быстрый старт

Страница: 23 / 28

Software
23
using. each protocols drop-down list displays “None” and
your logical IP WAN addresses and/or logical IPX network
numbers.
48. To map this DLCI to a data port, in the Port Mappings
group click the Port number(s) you want to associate with
this DLCI.
49. Ensure that Throttle Up and Down is selected in the
Congestion Management group.
50. Ensure that Adhere to CIR + Be is selected in the Mode
group. Multi-Tech recommends using this setting initially.
51. Click the Committed Information Rate text box in the
Settings (in Bits/second) group and enter the CIR value
your service provider supplied for this DLCI.
52. Click the Excess Burst Rate (Be) text box in the Settings
(in Bits/second) group and enter the Be value your
service provider supplied for this DLCI.
53. The Compression option may be useful at low link
speeds; however, do not use this feature with a high
speed link.
54. Repeat steps 46 through 53 for each new DLCI.
55. Click OK when you are satisfied with all your selections.
56. The Writing Setup dialog box is displayed as the setup
configuration is written to the MultiFRAD.
57. After the setup is written to the MultiFRAD, the unit
reboots.