Multi-Tech MultiFRAD FR2201, Быстрый старт

Страница: 14 / 28

MultiFRAD II Quick Start Guide
If your network protocol is IPX, continue with the following
steps. If your network protocol is IP, click the IPX Routing
Enable check box to clear it and disable IPX, then click
OK and proceed to step 14.
10. Router Name: You can either use the default Router
Name (MultiFRAD 2000) or assign a new Router Name in
this field. The Router Name must be a printable ASCII
string of a maximum of 47 characters. The MultiFRAD
uses this name to advertise its service throughout the IPX
internetwork.
11. Ethernet: You can enable Auto Learn Network Numbers
by leaving the default Yes or you can click on No (each
Network number field will then become active) and
manually assign the network numbers here.
If no file server is connected to the Ethernet segment, then
this field should be No (recommended).
If you enable Auto Learn (Yes), the MultiFRAD will learn
the IPX network numbers from the file server.
If you select No for Auto Learn, record the network
numbers assigned by the network file server for each of
the four frame types (Raw (802.3), LLC (802.2), EthernetII
(Type II), SNAP) in the space provided below.
14