background image

SAFETY INFORMATION

16

MultiConnect

®

Dragonfly

Nano MTQN-MNG1-B02 Device Guide

UL evaluated this device for use in ordinary locations only. UL did NOT evaluate this device for installation in
a vehicle or other outdoor locations. UL Certification does not apply or extend to use in vehicles or outdoor
applications.

Device Maintenance

When maintaining your device:

Do not attempt to disassemble the device. There are no user serviceable parts inside.

Do not misuse the device. Follow instructions on proper operation and only use as intended. Misuse could
make the device inoperable, damage the device and/or other equipment, or harm users.

Do not apply excessive pressure or place unnecessary weight on the device. This could result in damage to
the device or harm to users.

Do not use this device in explosive or hazardous environments unless the model is specifically approved for
such use. The device may cause sparks. Sparks in explosive areas could cause explosion or fire and may
result in property damage, severe injury, and/or death.

Do not expose your device to any extreme environment where the temperature or humidity is high. Such
exposure could result in damage to the device or fire.

Do not expose the device to water, rain, or spilled beverages. It is not waterproof. Exposure to liquids could
result in damage to the device.

Do not place the device alongside computer discs, credit or travel cards, or other magnetic media. The
information contained on discs or cards may be affected by the device.

Using accessories, such as antennas, that MultiTech has not authorized or that are not compliant with
MultiTech's accessory specifications may invalidate the warranty.

If the device is not working properly, contact MultiTech Technical Support.

User Responsibility

Respect all local regulations for operating your wireless device. Use the security features to block unauthorized use
and theft.

Содержание MultiConnect Dragonfly Nano MTQN-MNG1-B02





























Отзывы: