HARDWARE AND SPECIFICATIONS
MultiConnect
®
Dragonfly
™
Nano MTQN-MNG1-B02 Device Guide
7
Chapter 3 – Hardware and Specifications
Specifications
Category
Description
Performance
1
3GPP Release 13 Cat M1 Half Duplex (Up to 375K bps downlink and uplink)
Frequency Band
(MHz)
AT&T
Verizon
700 MHz (B12), 850 MHz (B5),
AWS1700 MHz (B4) and 1900 MHz
(B2)
700 MHz (B13)
Interface
Connectors
1 UFL (Cellular), 1xMicro USB, 1x 40-Pin Board-to-Board
I/O
1 x UART, 1 x HS USB
SMS
Mobile Terminate/Mobile Originate PDU / Text mode
LED
Link Status
Physical Description
Weight
less than 0.3 oz (8.5g)
Dimensions
28.96mm x 32.51mm (1.14 x 1.28 inches). Refer to Mechanical Drawings for details.
Connectors
Antenna
1 surface mount U.FL: cellular
SIM Holder
1.8 V and 3 V Micro SIM (3FF) card. SIM denotes: Subscriber Identity Module.
Pin header
40-pin female for USB or UART
Environment
Operating
Temperature
2
-40° C to +85° C (-40° F to +185° F)
Storage
Temperature
-40° C to +85° C (-40° F to +185° F)
Humidity
1
15%-93% RH, non-condensing
1
Actual performance speeds may be affected by a variety of attributes such as cell tower distance, data loads,
packet sizes, etc. Radio performance may be affected by temperature extremes. This is normal.
2
Device has been tested up to +85° C. UL Recognized @ 85° C.
The following table defines the remaining specifications for the MTQN-MNG1.
Category
Description
Certifications and Compliance
EMC Compliance
FCC Part 15 Class B
