REGULATORY INFORMATION
MultiConnect
®
Dragonfly
™
Nano MTQN-MNG1-B02 Device Guide
23
UMTS CH 2 UP
UMTS CH 25 UP
UMTS CH 35 DOWN
The following table provides the certified radio frequency data for this device:
FCC Rule
Parts
Frequency Range
Output Watts (mW)
Frequency Tolerance
Emission
Designator
27
699 - 716 MHz
0.316
1.0 PM
1M11G7D
27
699 - 716 MHz
0.316
1.0 PM
1M11W7D
22H
824 - 849 MHz
0.316
1.0 PM
1M11G7D
22H
824 - 849 MHz
0.316
1.0 PM
1M11W7D
27
1.71 - 1.755 GHz
0.316
1.0 PM
1M24G7D
27
1.71 - 1.755 GHz
0.316
1.0 PM
1M13W7D
24E
1.85 - 1.91 GHz
0.316
1.0 PM
1M12G7D
24E
1.85 - 1.91 GHz
0.316
1.0 PM
1M12W7D
Single Modular Approval. Power output listed is conducted. This device is approved for mobile and fixed use with
respect to RF exposure compliance, and may only be marketed to OEM installers. The antenna(s) used for this
transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all
persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure
compliance.
Maximum permitted antenna gain/cable:
3.67 dbi for 700 MHz
4.10 dBi for 850 MHz
6.74 dBi for 1700 MHz
7.12 dBi for 1900 MHz
The final product operating with this transmitter must include operating instructions and antenna installation
instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device
in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final
products may require the submission of a Class II permissive change application containing data pertinent to RF
Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.
This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for
U.S. operations.
