VERSA-LINK ATX-250
20
USER SELECTABLE
FEATURES
6.4 FAX TONE
6.4
DETECTION
If you connect a FAX machine to your
network, you will need to tell your ATX-
250 which
DEVICE
port it is on . This
allows auto-dial FAX calls to be
transferred to your FAX machine
automatically .
If you adding FAX to a voice line, connect
the FAX to DEVICE 2 .
If you are expanding a FAX line, connect
the FAX to DEVICE 1 .
Configuration switch 6 is used to select
FAX tone detection . Remember to unplug
and re-connect the AC power after
changing the configuration switch .
6.5 SELECTIVE RINGING
6.5
FEATURE WITH
6.5
TRANSFER
The “Selective Ringing” feature on your
ATX-250 is designed to be used in
conjunction with the “distinctive ring”
service offered by your local telephone
company .
In the “selective ring” mode, your ATX-
250 will detect the multiple ring patterns
associated with each telephone number
and route the call to the intended phone
device . Switching is completely transparent
to the caller .
“Selective Ringing” can be enabled by
simply placing all DIP Switches in, the up
position as indicated below-and recycling
power .
Manual Transfer -
In “Selective Ringing”
mode your ATX-250 has the same basic
manual transfer capability as with normal
function . To transfer calls to a selected
device, enter the proper device selection
code on your telephone key pad (or other
equipment) . The factory settings are:
Device Selection Codes
DEVICE 1 or 21
DEVICE 2 or 22
6.6 FACTORY SETTINGS
When your ATX-250 was shipped to you,
it was programmed with the following
settings:
IMPORTANT: Configuration switch changes
are not activated until AC power is re-applied
Therefore unplug and re-connect the AC
power cord after making any configuration
switch changes to enter these settings into
memory .
*
1
*
2
