VERSA-LINK ATX-250
0
4.2.2 Manual Transfer
To transfer calls to a selected device, enter the proper device selection code on your
telephone (or other equipment) . The factory settings are:
Device Selection Codes:
DEVICE 1
Device Selection Codes:
DEVICE 2
These device selection codes can be changed . See section 6 .1 for detailed information
on changing these codes .
The caller can manually transfer a call by using touch-tone telephones or other equip-
ment .
The called party can manually transfer a call with either touch-tone or pulse-dialing
equipment connected through the ATX-250 . If you plan to manually transfer calls with a
pulse-dialing telephone, choose device selection codes that do not use the symbol .
WHEN TO ENTER A DEVICE SELECTION CODE
Device selection codes can be entered any time a call is in process . A caller can start
entering device selection codes two seconds after hearing the first ring . This allows
calls to be processed while the system is unattended .
CORRECTING MISTAKES
If a mistake is made entering a device selection code, stop entering tones for two
seconds or longer, and re-enter the correct device selection code . If you are dialing on a
pulse-dialing phone, wait five seconds or longer before reentering the code .
4.2.3 CALL OPTI-MIZER
Often it is desirable for all calls after hours and on weekends to go directly to the FAX
machine or another automatic telephone device . This is especially useful when expand-
ing a voice line with FAX and/or MODEM .
The primary application is for a company that has several incoming lines with rollover .
Only one number is dialed by callers for voice traffic . If that line is busy, the telephone
company “rolls over” the call to a second incoming line . If the second line is busy, the
call “rolls over”, and so on until the incoming call finds a line that is not busy .
The last line is published as the FAX number . Any incoming FAX call will ring in on this
line . During the day, the last line is primarily used for voice, but may also be used for
both incoming and outgoing FAX . However, at night, any call coming in on the last line is
assumed to be a FAX . This is because all other lines would have to be busy for a voice
call to come in on this line .
OPERATION
*
1
*
2
*
