VERSA-LINK ATX-250
6.2 CALL OPTI-MIZER
CALL OPTI-MIZER is useful if you want
all incoming calls to go to
DEVICE 2
when your office is unattended . See
section 4 .2 .3 for a detailed description .
When using CALL OPTI-MIZER, there
are three choices for the parameters
that determine when a call is sent to
DE-
VICE 2
. CALL OPTI-MIZER can also be
completely disabled . Set the configuration
switches 3 and 4 according to the follow-
ing table:
Remember to unplug and re-connect the
AC power after changing the configuration
switches .
6.3 PROTECTED HOOK
6.3
FLASH
Some key tone telephone systems do not
allow tone generation on an inbound call .
On these systems, manual transfers can
still be accomplished by fooling the
telephone system into thinking it is
making an outbound call . This is done by
pressing the “
FLASH
” key on the
telephone, and then dialing the device
code for
DEVICE 2
.
For example, if your FAX is connected to
DEVICE 2
, and the device selection code
for
DEVICE 2
is , calls can be
manually transferred to the FAX by
pressing
FLASH
and then .
To prevent the caller from being hung up
when the
FLASH
key is pressed, you will
want to activate Protected Hook Flash .
This will place the call on hold while the
flash button momentarily disconnects the
line . Protected Hook Flash cannot be
used if your phone is pulse-dial or if this
line has “call waiting” .
Configuration switch 5 is used to select
Protected Hook Flash . Remember to
unplug and re-connect the AC power
after changing the configuration switch .
USER SELECTABLE
FEATURES
*
2
*
2
PROTECTED
HOOK FLASH
