![Multi-Link VERSA-LINKTM ATX-250 Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/multi-link/versa-linktm-atx-250/versa-linktm-atx-250_owners-manual_1854006015.webp)
VERSA-LINK ATX-250
3
The following section covers installation
of your Versa-Link ATX-250 in various
applications .
NOTE:
You may want to call a local
telephone service company to install the
necessary jacks between the telephone
company’s line and your internal wiring .
5. INITIAL
CHECK-OUT
Your ATX-250 shipping carton should
contain the following equipment:
– Your Versa-Link ATX-250
– An AC wall transformer with cord
– One modular telephone cable
Plug the 12 Volt AC wall transformer into
an electrical outlet (110 Volt AC, 50-60
Hz) and plug its power cord into the
power connector on the back of your
ATX-250 . The
LED
indicator on the front
of your ATX-250 should now be lit,
showing that power is on and the
ATX-250 is operating .
5.2 CONNECTING TO
THE PHONE L INE
WHAT LINE DO I USE?
Locate and identify the telephone line to
which you plan to attach your ATX-250 . If
you are using a multi-line telephone
system with rollover, use the last line in
the rollover sequence .
WHERE DO I CONNECT MY ATX-250?
Locate a point on the line between the
telephone company and all existing
telephone equipment and extensions
attached to this line . Disconnect all
telephone equipment and extensions
from the telephone line . They will later be
re-connected to the telephone line
THROUGH your ATX-250 . You may need
to install RJ-11 jacks to facilitate
installation of your ATX-250 .
IMPORTANT:
One function of your ATX
250 is to receive incoming calls and then
distribute them to the proper equipment .
For this reason it is VERY important that
your ATX-250 be installed ahead of all
existing telephone extensions and
equipment .
Attach the incoming telephone line to the
LINE connector on the back of your
ATX-250 . The ATX-250 should now be
the only device connected to this
telephone line .
5.3 RE-CONNECTING
5.3
YOUR TELEPHONE
5.3
SYSTEM
If you are using this line for voice
communication, you will need to
reconnect your telephone system
THROUGH THE ATX-250 . First, you will
want to determine what type of phone
system you have .
INSTALLATION
5