Silent T
ransfer Destination
LINE
2
This feature determines which Port/device will receive a call
after
it has been “silently
transferred”.
Unrestricted Manual T
ransfer
LINE
2
This feature allows transfer ability at any time by either party and from any phone.
Recommended programming “ON”.
Security Access Code
PORT
1
This register contains the code for “
manually transferring” a call
to devices connected to
Port 1. See the Do’
s and Don’ts of SAC Programming before changing your code.
# 1
Digits 0-9,
*
, #
4 digits
maximum
1 = Port 1
2 = Port2
3 = Port 3
4 = Port 4
5 = Port 5
Unrestricted Manual T
ransfer
LINE
1
This feature allows transfer ability at any time by either party and from any phone.
Recommended programming “ON”.
0 = OFF
1 = ON
1
08
0 = OFF
1 = ON
1
07
Security Access Code
PORT
2
This register contains the code for “
manually transferring” a call
to devices connected to
Port 2. See the Do’
s and Don’ts of SAC Programming before changing your code.
# 2
Digits 0-9,
*
, #
4 digits
maximum
Security Access Code
PORT
3
This register contains the code for “
manually transferring” a call
to devices connected to
Port 3. See the Do’
s and Don’ts of SAC Programming before changing your code.
*
1
Digits 0-9,
*
, #
4 digits
maximum
11
10
09
06
4
2 8
The Stick II
equipment connected to the device port(s) you have designated for your fax(es). You can
program this feature “OFF” if you choose. The factory default setting for faxes is Port 4. You
may choose to have a different designated fax port for each line. See Programming Chart
for programming Line 1 Fax Port and Line 2 Fax Port.
Line-in-Use ìBusyî Tone
The Stick II will give a cadenced tone similar to the standard “busy” signal to any user
attempting to make an outbound call on devices connected to The Stick II when both lines. If
only one line is in use and you are trying to call from a device restricted to that line, you will
hear neither a dial tone nor a busy signal, telling you the non-restricted line is available if
needed.
Phone Line Surge Protection
The Stick II is designed to protects the unit from damage caused by most phone line
power surges. We recommend you plug your communication devices, including The Stick II,
into a power surge protection strip. For extra protection, for your telephone devices, also use
a phone line surge suppressor.
Power/Call Status Light
The LED on the front of The Stick II demonstrates two functions- when lit, it tells you the
unit is powered up and it blinks rapidly when in programming mode.
Two-Line Call Processor
The Stick II is a true two-line call processor. Two incoming calls can be processed by
The Stick II simultaneously. The process is fast and accurate and when added with your
particular programming needs, becomes an amazing communication tool you will wonder
how you ever did without!
4.2 Programmable Features
Alternate Ports
Incoming voice calls for Line 1 always default to Port 1 and voice calls for Line 2 always
default to Port 2. But, if the default port is in use, the Alternate Port feature lets you redirect the
call. If the alternate port is also busy, the caller gets a busy signal.
