manualshive.com logo in svg

Multenet PocketPAD Power over Ethernet, Руководство пользователя

Поделиться
Скачать
Multenet PocketPAD Power over Ethernet Скачать руководство пользователя страница 61

61  

T R O U B L E S H O O T I N G  

61

 

M U LT E N E T     P O C K E T P A D

Type ‘2’ (Upgrade Menu).

Type ‘5’ (Erase Dataflash). ‘y’ to confirm deletion.

The process will take a few minutes to complete and return to the Upgrade Menu.

Type ‘1’ (Change Upgrade Serial Speed) to match your serial line baud rate.  I recommend 

setting the highest baud rate (115200) for a faster upload of data.

Change your terminal session speed to the configured Upgrade Serial Speed setting.

‘Enter’ to continue once you have reconnected.

Transfer the PocketPAD firmware via ‘Kermit’.  You can find the latest firmware on the 

MULT

e

NET 

website.  Current or older firmware can be found on the CD shipped with the 

PocketPAD.

After the file upload, you will be prompted to set the baud rate back to 19200.  The data will be 

checked and verified.

Troubleshooting LEDs

System

Heartbeat (HBT) 

-  If this LED is permanently ON or OFF, the PocketPAD has failed 

and needs to be returned. The LED will be ON for some time (20 

seconds) during its boot-up cycle.

Power (PWR)

 

-  Lights up when there is power to the PocketPAD.  If this LED is 

OFF, check the Power Supply and its connections.

Serial Interface

Transmit (TX)

 

-  Lights up as data is sent to the serial interface.  If you send data 

to a configured TCP/UDP port and do not see the TX LED flash, 

check your PocketPAD configuration.

Receive (RX)

 

-  Lights up as data is received from the serial interface.  If data is 

received from the serial device, but does not get to your remote 

site, check your PocketPAD configuration.  There may also be 

a problem with the network.  Connect to the TCP/UDP port to 

check if data is received.

Network Interface - 10/100 Base-T

10/100 Base-T (10/100) 

-  Lights up if network is 100Mbps.  OFF is network is 10Mbps.  

Check if Autodetect is selected in the PocketPAD configuration.

Link/Activity (LNK/ACT)

 -  This LED flashes as data is transmitted/received over the 

Ethernet interface (if your configured serial device sends/

Содержание PocketPAD Power over Ethernet

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды