
14
G E T T I N G S TA R T E D
14
M U LT E N E T P O C K E T P A D
NET
10/100 Base-T
Ethernet Port
COM
Serial Port
RX LED
Lights when
serial data is
received.
TX LED
Lights when
serial data is
sent.
10/100 LED
Ethernet speed
indication:
ON = 100 Mbps
OFF = 10 Mbps
LNK/ACT LED
Flashes when activity
is seen on the network.
OFF if network is
disconnected.
Power
LED
ON when
device is
powered
up.
5V DC
Power
200 mA
Heartbeat
LED
Flashes
during normal
operation.
If solidly lit
there is a
problem.
10/100 Base-T PocketPAD
Connecting the PocketPAD
You can physically connect to the PocketPAD via two interfaces (serial port & Ethernet port).
COM 1 can be used to configure the unit on all the PocketPAD ranges. Configuration occurs
when the device boots up. It is indicated by the flashing TX and RX LEDs (defaulted to 20
seconds).
The easiest configuration method is via the Ethernet network using a web browser. The GUI is
simple and easy to navigate through the options.
10/100 Base-T Ethernet Network Connection
There are two ways to connect to your PocketPAD via the Ethernet Network:
- Via a 10/100 Base-T Hub or Switch, using a “Straight” Ethernet cable.
- Direct connection from the PC, using a “Crossed” Ethernet cable.
Содержание PocketPAD Power over Ethernet
Страница 79: ...7 9 7 9 M U LT E N E T P O C K E T PA D NOTES...