
5 3
U P G R A D I N G
5 3
M U LT E N E T P O C K E T P A D
5. Erase Dataflash
- Remove the current firmware.
6. Perform Integrity Check on Software - Check to see if the Firmware is valid.
R. Return
- Exit to previous menu.
Upgrading the Firmware
Select the speed at which you wish to upload the Firmware to the PocketPAD, by entering ‘
1
’.
Cycle through various baud rates by re-entering ‘
1
’ till you see the speed you wish to set.
Click ‘
2
’ to initiate the PocketPAD’s Firmware receiving mode.
If you have selected a different baud rate to the rate your are currently using, you will need to
disconnect and reconfigure your session to use the new baudrate. You will be need to change
back to the original baud rate once the firmware has uploaded.
Upload the firmware when prompted.
Send a file from your terminal session manager. Make sure the protocol used to deliver the file
is set to
KERMIT
. Browse to the location of your Firmware file.
Hyperterminal:
Transfer -> Send File
Select the correct Firmware for the specific device. A single Firmware release exists for
PocketPAD ranges. Check for updates on our website.
The upload may take some time to complete.
Содержание PocketPAD Power over Ethernet
Страница 79: ...7 9 7 9 M U LT E N E T P O C K E T PA D NOTES...