Mul-t-lock Entr Скачать руководство пользователя

Страница: 5 / 47

ENTR® User Manual

1.3 Prior to Installation

• Press & hold the knob (1) and turn slightly (2) until the cylinder cam is no longer

protruding from the side of the cylinder body (see illustration).

• Insert the cylinder (including baseplate & knob) from the interior side of the door.

• Once the cylinder is correctly aligned within the door, secure the cylinder in place

using the M5 screw.

• Do not over tighten the screw or use power tools to do so.

Note:

Do not hammer (or use any other excessive force) on the cylinder or knob when

inserting them into the door.
• Turn the knob back to the zero position. Knob marks point upwards.

Note:

The knob will jump out when returned to zero position.

1.4 Cylinder & Unit Installation

Zero position

Warning

: Do not attempt to operate the unit until assembled on the door.

Содержание Entr
















































Результаты поиска

Содержание Entr

Отзывы:

Похожие инструкции для Entr

Бренды по названию

Популярные бренды

Mul-t-lock Entr, Руководство пользователя

Результаты поиска

Содержание Entr

Отзывы:

Похожие инструкции для Entr

Бренды по названию

Популярные бренды