manualshive.com logo in svg

Mueller SENTRY II, Инструкция по установке и эксплуатации, Страница: 56 / 83

Поделиться
Скачать
Mueller SENTRY II Скачать руководство пользователя страница 56

59. Press the 

▼

key to scroll to the next option,

"Full Wash Delay.”

NOTE:

This option allows the Full Automatic

Wash Cycle to be delayed for 45 minutes to
allow adequate recovery time of the water
heating device in specific installations.

60. Press the 

✚ 

key to display the current setting,

no delay or 45 minute delay.

61. Press the 

✚ 

key to select a 45 minute delay

or the      key to select no delay.

62. Press the     key to enter the selection.

63. Press the 

✚

key to return to the main menu. 

64. Press the 

▼

key to scroll to the next option,

"Service Contact.”

65. Press the 

✚

key to select “Paul Mueller

Company.”

66. Consecutively press the 

▼

key, scrolling

through the "Service Contact” information
and telephone numbers until “Return to
Menu” is displayed.

67. Press the 

✚

key to return to the main menu.

68. Programming is complete, unplug the MTA

from the PLC. 

Note:

De-energize the power supply to the Sentry II for 5

minutes after making any programming changes.

This will ensure that the changes are stored to the E.Prom of the PLC.

Sentry II with Auto-Dosing Assembly Operating Instructions

50

Effective April 1, 2000

▲

Содержание SENTRY II




















































































Отзывы:

Нет отзывов