2. For thorough cleaning,
rotate the Micro
Filter (with Coarse Filter still inserted)
counterclockwise to release and lift out of
the base of the dishwasher. Remove
Coarse Filter as per Step 1 above.
3.
Remove the Flat Filter by lifting up.
4.
Rinse the 3 filter parts under running water. Use a small kitchen brush or tooth
-
brush to clean the fine holes of filters.
Warning: When cleaning the filters, don't bang or knock them to clean; otherwise,
the filters could become contorted and the performance of dishwasher could be
compromised.
5.
To reassemble, position the Flat Filter over the
filter hole at the base of the dishwasher. Insert the
Coarse Filter back into the Micro Filter by pushing in
until tabs are securely positioned. Then, reinsert the
Micro Filter back into the filter hole, pressing down
-
wards and turning clockwise to secure.
Note: Do not reinsert the Micro Filter upside down.
6.
Thorough cleaning of the filter assembly should be
carried out once a week with regular use of the dish-
washer.
WARNING: THE DISHWASHER MUST NEVER BE USED WITHOUT THE FILTERS.
IMPROPER REPLACEMENT OF THE FILTER MAY REDUCE THE PERFORMANCE
LEVEL OF THE APPLIANCE AND DAMAGE DISHES AND UTENSILS.
26
CLEANING THE SPRAY ARMS
It is necessary to clean the spray arms regularly as hard water chemicals will clog
the spray arm jets and bearings.
To remove the top spray arm, unscrew the lock nut clockwise and pull the spray
arm down to release. To remove the bottom spray arm, grasp the middle and pull
up out of the socket with a little force.