10
Adjusting the settings:
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1. Find out about the hardness value of your tap water. Your water utility company
may help you with this.
2. Use the Water hardness table (listed below) to set the value on your dishwasher
based on the hardness of your tap water.
3. Close the door.
4. Press the "Power" button.
5. Hold down the "Delay" button and then press the "Program" button for 5 seconds.
The buzzer rings one time, and “H”.. flashes on the digital display. (Factory setting is
H0)
To change the settings:
1. Press the " Delay " button.
Each time the button is pressed, the set value increases by one level; when the value
of H7 has been reached, the display goes back to H0 (off).
2. When you have adjusted to the desired level, press the" Program " button. The
chosen setting has now been stored.
Clark
Water hardness
Range
Mmol/l Set value on
the machine
0-8
9-10
11-12
13-15
16-20
21-26
27-38
39-62
soft
soft
medium
medium
medium
hard
hard
hard
0-1.1
1.2-1.4
1.5-1.8
1.9-2.1
2.2-2.9
3.0-3.7
3.8-5.4
5.5-8.9
H0
H1
H2
H3
H4
H5
H6
H7
Water hardness table
