TURNING ON THE APPLIANCE
12. Upper Wash indicator light:
The light illuminates when the Upper layer feature is
selected, and the upper spray arm is in motion.
13. Rinse aid refill indicator:
The indicator light turns ON when the rinse aid dispenser
needs a refill.
14. Child lock indicator:
The “Child Lock” indicator light flashes 6 times and then
stays solid once the Child lock buttons (ALT + Sani) are pressed and held for 3
seconds.
15. Lower Wash indicator light:
The light illuminates when the Lower layer feature is
selected, and the lower spray arm is in motion.
STARTING A WASH CYCLE:
1. Pull out the lower and upper racks, load the dishes, and push the racks all the way
back. It is recommended to load the lower rack first, then the upper one (see the
section entitled "Loading the Dishwasher"). Pour in the detergent (see the section
entitled "Dishwasher Setup").
2. Insert the plug into the socket. You must have: 120-volt, 60Hz, AC-only,10-or
12-amp, fused electrical supply.
Make sure that the water supply is turned on to full pressure.
3. Close the door, using a little force to ensure it latches properly.
NOTE: A click could be heard when the door is properly closed.
4. Press the "Power" button. Press the "Program" button to select a desired "Wash
cycle". (See the section entitled "Wash Cycle Information").
5. Press the Start/Pause button, and the dishwasher will start the wash cycle.
When the washing cycle is over, you can shut off the dishwasher by pressing "Power"
button.
CHANGING THE WASH CYCLE:
Prerequisite: The ongoing cycle can only be modified if the detergent dispenser cover
is not open (the door can be opened for viewing). Otherwise, the detergent may have
already been released, and the appliance may have already drained the wash water. If
this is the case, the detergent dispenser must be refilled (see the section entitled "Fill
the Detergent Dispenser").
Press the "Power" button to cancel the program, and press it on again to change the
program to the desired wash cycle setting (see the section entitled "Starting a wash
cycle" ).
NOTE: If you open the door during the wash cycle, the machine pauses, and the warn-
ing alarm rings. On display appears E1.
When you close the door, you must press the Start/Pause button and the the dish-
washer will continue to work.
23
