KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
76
– install a silencer on the
tractor;
During installation of the
silencer screw the nut, pos.
1, to the full contact between
the parts, pos. 2, 3, 4, 5, after
which screw the nuts, pos. 1,
for another 1...2 turns and
lock with
nut В.
The tolerance of coaxility of
the exhaust pipe in respect of
the silencer branch pipe is
Ø2
mm.
Provide
by
movement of the bracket,
pos. 6, with nut E, lock with
nuts F, after which tighten
the bolts, pos. G.
Gas
blow-by
in
the
connection
between
the
exhaust pipe and the silencer
during the engine start-up
and operation is not allowed.
– in order to enhance reliability of leak-tightness over the butt joint of “exhaust pipe –
silencer” during installation of the silencer on the tractor, it is necessary to apply a layer of
Loctite 5920 sealant on the exhaust pipe over the circumference (it is available in the
SPTA kit for the tractor) by a solid roller with the thickness of 5...7 mm at the distance of
5...10 mm from the pipe end;
–install headlights, hinge pivot of central track rod, mirrors, window wiper brushes, safety
belts, silencer, nozzle and air intake pipe; warmth-keeper in winter season;
– connect the minus bar to the battery master switch terminal;
– remove shims from under the spring attachment;
– fill settled fuel to the tractor;
– it is necessary to screw or unscrew the generator adjustment bolt 6582 depending upon
the season (see Fig.28);
– disengage the rear axle. Engage the rear axle in case of tractor operation with
agricultural implements or under heavy road conditions;
– adjust the traffic headlights (see subsection 5.1.3).
nozzle
clamp 99730
bar 744
Р-1200011-2
bolt М12-6gx45.56.019
front left pillar of the cabin
framework
silencer
bolt М12-6gx45.56.019
washer 700.13.00.027
washer 700.13.00.027-1
ring 700.13.00.028
bushing 700.13.00.029-1
nut М12-6Н.8.019
clamp 99607
exhaust pipe
n
ut М10-6Н.8.019
bolt М16-6gx30.56.019
washer 16.65
Г.05
washer 17/01.019
bracket 744РЗ-1200030-1
А-А
G
E
F
Содержание K-744R1
Страница 2: ...MTZ KIROVETS tractors K 744R1 K 744R2 K 744R3 K 744R4 2...
Страница 107: ...KIROVETS K 744R1 K 744R2 K 744R3 K 744R4 tractors 107 Driving shaft friction clutch I...
Страница 109: ...KIROVETS K 744R1 K 744R2 K 744R3 K 744R4 tractors 109 Driving shaft friction clutches II and III...
Страница 111: ...KIROVETS K 744R1 K 744R2 K 744R3 K 744R4 tractors 111 Driving shaft friction clutch IV...
