MTZ K-744R1, Руководство по эксплуатации

Страница: 115 / 202

KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
115
Job content
Preparation for
operating
running-in
Execution of
operating
running-in
Completion of
operating
running-in
Note
filters
Drain the following:
– condensate from the air
cylinders  
– 0.1 l of fuel from coarse
mesh and fine mesh fuel
filters;  
Lubricate the following:
– fluid pressure cylinder
pins of implement-attaching
linkage and steering
hydraulic system 
– supports of service brake
expanders 
– axles of the frame vertical
hinge;

– spring eyes 
– main lever shaft supports
of the mechanism of
attachment 
Check the following and
adjust, if required:
– drive belt tension 
– rod travel in brake
chamber of the service
brakes 
– fuel injection lead angle:
– for ЯМЗ-238НД engine 
– for 8481.10 engine

Expansion gaps in the valve
mechanism having
preliminarily tightened the
nuts fastening the cylinder
heads or rocker pivots:
– for 8481.10 engine

– for ЯМЗ-238НД engine

Replace oil:
– in engine lubrication
system 
– in transmission gearbox
hydraulic system

– in main and final drive
casing of the drive axle
system 
Set the pressure in tyres

Check the condition of tyres
and air pressure therein

Check the drive belt tension
and adjust, if required
 
Check the electrolyte level,
condition of terminals and
vents in storage battery
plugs. If necessary, refill
distilled water. Lubricate the
non-contact parts of
terminals and wire lugs with
technical vaseline
 