7.23.3 LOP – Running test procedures
Preconditions
☑
Engine is stopped and starting disabled.
Preparatory steps
1.
Connect battery in accordance with battery
manufacturer's instructions.
2.
Switch on master power switch.
3.
Switch on engine management system
ECS-5.
Result:
• LOCAL OPERATION illuminated pushbut-
ton (1) is illuminated brightly (local control
mode is active);
Switching between local and remote control mode (automatic on-board net-
work)
1.
Press LOCAL OPERATION illuminated pushbutton (1).
Result:
• LOCAL OPERATION illuminated pushbutton (1) flashes: Setting does not correspond with feedback signal
from engine control system.
• LOCAL OPERATION illuminated pushbutton (1) is illuminated at basic brightness: Remote control mode is
active.
2.
Press LOCAL OPERATION illuminated pushbutton (1) again.
Result:
LOCAL OPERATION illuminated pushbutton (1) is illuminated brightly (local control mode is active);
228 | Emergency Instrumentation (Local Operating Panel) | MS150031/06E 2016-010
TIM-ID: 0000008872 - 005
