Easy-change fuel filter replace-
ment with the engine stopped
1.
Cut out the filter to be replaced.
A Both filters cut in (operating position)
B Left filter cut out
C Right filter cut out
2.
Unscrew switched off easy-change filter with
oil filter wrench.
3.
Clean sealing surface on filter head.
4.
Check seal on new easy-change filter and
moisten with fuel.
5.
Fit SOLAS shield (→ Page 19).
6.
Install and tighten easy-change filter by hand.
7.
Set three-way cock to operating position
(both filters cut in).
8.
Replace further fuel filters in the same way.
9.
Vent fuel system (→ Page 170).
Easy-change fuel filter replace-
ment with the engine running
1.
Cut out the filter to be replaced.
2.
Open the threaded vent plugs at the filter
head of the cut-out filter and make sure that
the fuel filter is not pressurized.
3.
Close threaded vent plugs.
4.
Unscrew switched off easy-change filter with
oil filter wrench.
5.
Clean sealing surface on filter head.
6.
Check seal on new easy-change filter and
moisten with fuel.
7.
Fit SOLAS shield (→ Page 19).
8.
Install and tighten easy-change filter by hand.
9.
Set three-way cock to operating position
(both filters cut in).
10.
Replace further fuel filters in the same way.
MS150031/06E 2016-010
| Fuel Filter | 173
TIM-ID: 0000004911 - 008
