MTU 10V1600 B40S Скачать руководство пользователя страница 110

Страница: 110 / 132

7.10 Coolant Circuit, General, High-Temperature Circuit

7.10.1

Engine coolant – Level check

Preconditions

☑

Engine is stopped and starting disabled.

☑

MTU Fluids and Lubricants Specifications (A001063/..) are available.

WARNING

Coolant is hot and under pressure.

Risk of injury and scalding!

• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.

Coolant-level check at filler
neck:

Turn breather valve on coolant expansion
tank counterclockwise to the first stop and
allow pressure to escape.

Continue to turn breather valve counter-
clockwise and remove.

Check coolant level (coolant must be visi-
ble at the lower edge of the cast-in eye or
at the marking plate).

Top up with treated coolant as necessary
(→ Page 112).

Check breather valve (visual inspection)
and clean if necessary.

Place breather valve on filler neck and
close.

Coolant-level check by means of level sensor:

Switch on engine control system and check readings on the display.

Top up with treated coolant as necessary (→ Page 112).

MS150076/05E 2014-02

| Task Description | 109

Содержание 10V1600 B40S





































































































































Результаты поиска

Содержание 10V1600 B40S

Отзывы:

Бренды по названию

Популярные бренды

MTU 10V1600 B40S, Руководство по эксплуатации

Результаты поиска

Содержание 10V1600 B40S

Отзывы:

Бренды по названию

Популярные бренды