MTU 10V1600 B40S Скачать руководство пользователя страница 109

Страница: 109 / 132

7.9 Oil Filtration / Cooling

7.9.1

Engine oil filter – Replacement

Preconditions

☑

Engine is stopped and starting disabled.

Special tools, Material, Spare parts

Designation

Use

Part

No.

Qty.

Torque wrench, 10-60 Nm

F30510423

Ratchet

F30027340

Socket, 32 mm

F30006120

Engine oil
Oil filter element

(→ Spare Parts Catalog)

WARNING

Hot oil.
Oil can contain combustion residues which are harmful to health.

Risk of injury and poisoning!

• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.

Replacing engine oil filter

Unscrew the oil filter covers (1) approx. 3
to 4 revolutions.

Wait 10 minutes until the oil has drained
from the filter housings.

Remove cover (1) with oil filter element (3)
and remove oil filter element (3) by press-
ing on the bottom edge from the side.

Check condition of sealing ring (2) on cov-
er.

Replace sealing ring (2) if damaged.

Coat sealing ring (2) with oil.

Insert new oil filter element (3) in cover (1)
and press in until it locks in place.

Screw on cover (1) with oil filter element (3) and tighten to the specified torque with a torque wrench.

Name

Size

Type

Lubricant

Value/Standard

Cover

Tightening

torque

(Engine

oil)

Replace other engine oil filters in the same way.

10.

Check oil level (→ Page 106)

108 | Task Description |

MS150076/05E 2014-02

Содержание 10V1600 B40S





































































































































Результаты поиска

Содержание 10V1600 B40S

Отзывы:

Бренды по названию

Популярные бренды

MTU 10V1600 B40S, Руководство по эксплуатации

Результаты поиска

Содержание 10V1600 B40S

Отзывы:

Бренды по названию

Популярные бренды