background image

Medical Test Supply 

 

CMS-50FF 

 

Instructions for CMS-50FF Pulse Oximeter

 

Dear users, thank you very much for purchasing the Pulse Oximeter.     

This Manual is written and compiled in accordance with the

 

council directive  MDD93/42/EEC for 

medical  devices  and  harmonized  standards.  In  case  of  modifications  and  software  upgrades,  the 

information contained in this document is subject to change without notice. 

The Manual describes, in accordancKe with the  Pulse Oximeter’s features and requirements, main 

structure, functions, specifications, correct methods for transportation, installation, usage, operation, 

repair,  maintenance and  storage, etc.  as  well  as  the safety  procedures  to protect both  the user  and 

equipment. Refer to the respective chapters for details. 

Please read the User Manual carefully before using this product. The User Manual which describes 

the operating procedures should be followed strictly. Failure to follow  the User Manual may cause 

measuring abnormality, equipment damage and human injury. The manufacturer is NOT responsible 

for the safety, reliability and performance issues and any monitoring abnormality, human injury and 

equipment  damage  due  to  users'  negligence  of  the  operation  instructions.  The  manufacturer’s 

warranty service does not cover such faults.     

Owing  to  the  forthcoming  renovation,  the  specific  products  you  received  may  not  be  totally  in 

accordance with the description of this User Manual. We would sincerely regret for that.                                                                                                 

 

This product is medical device, which can be used repeatedly. 

 

WARNING: 

 

Uncomfortable or painful feeling may appear if using the device ceaselessly, especially for 

the  microcirculation  barrier  patients.  It  is  recommended  that  the  sensor  should  not  be 

applied to the same finger for over 2 hours. 

 

For the special patients, there should be a more prudent inspecting in the placing process. 

The device cannot be clipped on the edema and tender tissue. 

 

The light (the infrared is invisible) emitted from the device is harmful to the eyes, so the 

user and the maintenance man should not stare at the light. 

 

Testee cannot use enamel or other makeup. 

 

Testee’s fingernail cannot be too long. 

 

Please refer to the correlative literature about the clinical restrictions and caution. 

 

This device is not intended for treatment.

 

The User Manual is published by our company. All rights reserved. 

Содержание CMS-50FF



















Отзывы: