Installation and Operational Manual
•
Boutique Collection
•
SculptureStone® Tubs
11 / mtibaths.com
Care and Cleaning Instructions
FOR MATTE FINISH:
FOR GLOSS FINISH:
The ESS surface of all MTI tubs is among the highest quality surfaces available. Its hard, non-porous surface prevents dirt
from accumulating and resists stains better than other materials. This tub is made of resin and natural minerals and may
have minor variations in color and surface texture throughout the tub. This is normal and part of the unique, hand-crafted
beauty for products made from natural minerals such as MTI's Engineered SculptureStone®. With normal use, the SS
product will retain its beauty with only a minimal amount of care. To maintain the elegant look of the SS surface, follow
these simple steps:
1.
MTI recommends cleaning with any mild dish soap and water or products specifically made for cleaning
granite or other high-gloss counter surfaces (e.g. Countertop Magic). Do not apply to the floor of the tub, as
some products may make the tub slippery.
2.
Remove dust or dry dirt with a soft, damp cloth.
3.
Clean grease, oil, paint or ink stains with isopropyl (rubbing) alcohol. Dry with a soft, dry cloth.
4.
Never use any abrasive cleaners. If any product feels gritty when rubbed between your fingers, it is NOT safe
to use on your gloss or high-gloss ESS product.
5.
Avoid using razor blades or other sharp objects that might scratch the surface.
6.
Do not use harsh chemicals, such as hydrochloric acid, sodium hydroxide, paint thinner, chloride solvents or
any strong acid or base, as this will permanently damage the finish. Also avoid any cleaners that include lime
removal agents such as CLR or Lime-A-Way, as these can also damage the finish.
7.
Avoid any bath products that contain natural or artificial dyes. Test product first on an inconspicuous area
before using.
The MTI tub has been designed and engineered to resist scratches and stains when used properly. The
durable finish will resist food acids and should not stain under normal bathroom conditions. Improper use may
damage the tub or its finish and void the warranty.
Remember:
If you do damage the tub, minor cuts and scratches can usually be buffed or polished out of the
finish by a qualified professional.
1.
Remove dust or dry dirt with a soft, damp cloth, and clean with any mild dish soap and water.
2.
Clean grease, oil, paint or ink stains with isopropyl (rubbing) alcohol. Dry with a soft, dry cloth. MTI
recommends Mr. Clean® Magic Eraser.
3.
For more stubborn stains, use a mild abrasive cleaner such as Soft Scrub or Bon Ami. It may take a little
more scrubbing to actually remove marks and polish surface. You can also use a gray Scotch Brite pad.
DO
NOT USE
the green Scotch Brite pads on the solid-surface tubs as it will destroy the finish.
4.
Avoid using razor blades or other sharp objects that might scratch the surface.
5.
Do not use harsh chemicals, such as hydrochloric acid, sodium hydroxide, paint thinner, chloride solvents,
strong acid or base, as these will permanently damage the finish. Also avoid any cleaners that include lime
removal agents such as CLR or Lime-A-Way, as these can also damage the finish.
6.
Small scratches may be removed by sanding with 180 grit wet/dry paper and then cleaning with Soft Scrub.
7.
Avoid any bath products that contain natural or artificial dyes. Test product first on an inconspicuous area
before using.
