Programming Individual
Accessories & Switches Into
The DCS System
Programming Accessories
Turn off the power supply, then make sure the accessory has been wired into the
AIU as shown in the preceding examples and according to your accessory’s
instructions.
Power up to 18 volts and press READ on the DCS handheld to add your AIU to
the DCS system (see page 5 for more explanation). Go through the DCS
handheld’s menu as follows:
1. Press the Black MENU button to bring up the four main
menus in the DCS system.
2. Using the thumbwheel,
scroll down the menu list
until you arrive at System.
3. Press the thumbwheel to
enter the System Menu.
Your screen should reveal at
the bottom that you are in
the System Menu.
4. Scroll and select
Accessory Setup from the
available choices in the
System Menu.
5. Scroll and select Add
Accessory from the
available choices in the
Accessory Setup Menu.
MENU
SOUND
CONTROL
SYSTEM
ADVANCED
Press Menu
SOUND
CONTROL
SYSTEM
ADVANCED
SWITCH SETUP
ACCESSORY SETUP
SET REMOTE ADDRESS
MENU: SYSTEM
ADD ACCESSORY
EDIT ACCESSORY
DELETE ACCESSORY
MENU: ACCESSORY SETUP
Scroll and Select System
Scroll and Select
Accessory Setup
Select Add Accessory
DCS Accessory Interface Unit
12