Programming Switches
Turn off the power supply, then make sure the switch has been wired into the AIU as
shown in the preceding examples and according to your switch’s instructions.
Power up to 18 volts and press READ on the DCS handheld to add your AIU to the DCS
system (see page 5 for more explanation). Go through the DCS handheld’s menu as
follows:
1. Wire the switch into the AIU as shown in the AIU user’s manual and your track’s
instructions.
2. Go through the DCS handheld’s menu as follows:
3. Select which TIU the switch is wired to (via the AIU).
A. Press Menu Button
B. Select System
C. Select Switch Setup
D. Select Add Switch
MENU
SOUND
CONTROL
SYSTEM
ADVANCED
Press Menu
SOUND
CONTROL
SYSTEM
ADVANCED
Scroll and Select System
Scroll and Select
Switch Setup
SWITCH SETUP
ACCESSORY SETUP
SET REMOTE ADDRESS
MENU: SYSTEM
ADD SWITCH
EDIT SWITCH
DELETE SWITCH
MENU: SWITCH SETUP
1
2
3
SEL TIU TO USE
Select Add Switch
Select TIU To Use
DCS Accessory Interface Unit
15