background image

SAFE OPERATION PRACTICES

2

Safety Symbols

This table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the tractor before attempting to assemble and operate.

Symbol

Description

READ THE OPERATOR’S MANUAL(S) 
Read, understand and follow all instructions in the manual(s) before attempting to assemble and operate.

STOP 
Turn OFF the engine before opening the bagger cover.

General Operation

1. 

Read, understand and follow all instructions on your equipment and in their manuals before 

attempting to assemble and operate. Keep this manual in a safe place for future and regular 

reference and for ordering replacement parts. 

2. 

To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and 

pets at least 75 feet from the tractor while it is in operation. Stop tractor if anyone enters the 

area.

3. 

Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, 

wire, bones, toys and other foreign objects which could be picked up and thrown by the 

blade(s). Thrown objects can cause serious personal injury. 

4. 

Always wear safety glasses or safety goggles during operation and while performing an 

adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious 

injury to the eyes. 

5. 

Do not operate the tractor without the discharge cover or entire grass catcher in its proper 

place. A missing or damaged discharge cover or grass bag attachment component may result 

in thrown objects or blade contact injuries.

6. 

Do not put hands or feet near rotating parts or under the cutting deck. Contact with the 

blade(s) can amputate hands and feet.

7. 

Shut off tractor’s engine and wait for blades to come to a complete stop before unclogging 

tractor’s discharge opening or bagger parts.

8. 

Slow down before turning. Operate the tractor smoothly. Avoid erratic operation and 

excessive speed. Be aware that a grass catcher attachment can affect the handling 

characteristics of your tractor.

9. 

Disengage blade(s), set parking brake, stop engine and wait until the blade(s) come to a 

complete stop before opening bagger attachment’s top cover, removing grass catcher, 

emptying grass, unclogging chute, removing any grass or debris or making any adjustments. 

Never leave a running tractor unattended. Always turn off blade(s), place transmission in 

neutral, set parking brake, stop engine and remove key before dismounting.

10. 

Your tractor is designed to cut normal residential grass. Do not attempt to mow through 

unusually tall, dry grass (e.g., pasture) or piles of dry leaves. Dry grass or leaves may contact 

the engine exhaust and/or build up on the tractor deck presenting a potential fire hazard. 

11. 

If situations occur which are not covered in this manual, use care and good judgment. 

Contact your customer service representative for assistance.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents which can result in severe 

injury or death. Attachments can also affect the stability of the tractor. All slopes require extra 

caution. 
For your safety, use the slope gauge included as part of this manual to estimate the angle of slopes 

before operating this tractor on a sloped or hilly area. If the slope is greater than 10 degrees or 17 

percent as shown on the slope gauge, do not operate the tractor with the grass bag attachment 

installed on that area or serious injury could result.

Do:

1. 

Mow up and down slopes, not across. Exercise extreme caution when changing direction on 

slopes.

2. 

Watch for holes, ruts, bumps, rocks or other hidden objects. Uneven terrain could overturn 

the tractor. Tall grass can hide obstacles.

3. 

Use slow speed. Choose a low enough speed setting so that you will not have to stop or shift 

while on the slope. Tires may lose traction on slopes even though the brakes are functioning 

properly. Always keep tractor in gear when going down slopes to take advantage of engine 

braking action.

4. 

Follow the manufacturer’s recommendations for wheel weights or counterweights to 

improve stability. Keep all movement on the slopes slow and gradual. Do not make sudden 

changes in speed or direction. Rapid engagement or braking could cause the front of the 

tractor to lift and rapidly flip over backwards which could cause serious injury.

5. 

Avoid starting or stopping on a slope. If tires lose traction, disengage the blade(s) and 

proceed slowly straight down the slope.

Do Not: 

1. 

Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

2. 

Do not mow near drop-offs, ditches or embankments. The tractor could suddenly turn over if 

a wheel is over the edge of a cliff, ditch, or if an edge caves in.

3. 

Do not try to stabilize the tractor by putting your foot on the ground.

4. 

Do not use a grass catcher on steep slopes. 

5. 

Do not mow on wet grass. Reduced traction could cause sliding.

General Service

1. 

Before cleaning, repairing or inspecting, make certain the blade(s) and all moving parts 

have stopped. Disconnect the spark plug wire and ground against the engine to prevent 

unintended starting.

2. 

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. 

3. 

Never tamper with your tractor’s safety interlock system or other safety devices. Check their 

proper operation regularly.

4. 

Never attempt to make adjustments or repairs while the tractor’s engine is running.

5. 

Grass catcher components and the discharge cover are subject to wear and damage which 

could expose moving parts or allow objects to be thrown. For safety protection, frequently 

check components and replace immediately with original equipment manufacturer’s 

(O.E.M.) parts only, listed in this manual. Use of parts which do not meet the original 

equipment specifications may lead to improper performance and compromise safety! 

6. 

Maintain or replace safety and instruction labels, as necessary.

 

WARNING

 This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and 

follow all instructions in this manual before attempting to operate this tractor. Failure to comply with these instructions may result in personal injury. When you see this 

symbol. 

HEED ITS WARNING!

 

DANGER

This attachment was built to be operated according to the safe operation practices in this manual. Carelessness or error on the part of the operator can result in serious 

injury. Tractors are capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions, as well as the safety instructions 

provided with your tractor, could result in serious injury or death.

 

WARNING

Your Responsibility — Restrict the use of this tractor to persons who read, understand and follow the warnings and instructions in this manual and on the tractor. 

SAVE THESE INSTRUCTIONS!

Содержание 19A70054 Series

































Отзывы: